CARE + MAINTENANCE
POWDER COATED ALUMINUM
CHARACTERISTICS
•
Our metal furniture is handcrafted from extruded and cast aluminum elements.
•
The aluminum is baked with a durable polyester powdercoat.
•
To make the joints strong, the frames are assembled with precision welds and strengthened stress points.
•
Although mostly resistant to rust, powder coated aluminum will oxidize if the coating is scratched or damaged.
•
High salt exposure in coastal locations, water with high PH balances and garden pesticides can all damage the finish if furniture is not regularly maintained.
•
Darker finishes absorb UV rays more than lighter finishes, which can make furniture warm to the touch – and therefore may accelerate fading if left uncovered.
•
Commitment to care and maintenance will correlate to the length of time your finish will last.
CARE + MAINTENANCE
•
Furniture should be thoroughly cleaned often using a soft towel and mild soap.
•
In coastal locations, furniture should be washed with a mild soap and rinsed frequently to remove salt deposits.
•
A solution of 1:1 white distilled vinegar and water can be used to help remove water spots. Then rinse with water and dry with a soft cloth.
•
Metal furniture can be waxed twice a year, or as needed, to protect the finish. Furniture should always be cleaned first.
•
HARBOUR Aluminum Touch-Up kits are available for minor surface scratches.
•
Do not use any harsh solvent-based, abrasive or stainless steel cleaners.
RECOMMENDATIONS
•
To prevent water spots, do not allow standing water on the surface of the furniture.
•
To prevent scratches and chips, do not drag furniture on the ground. The finish can oxidize if damaged.
•
Use coasters under glasses and cold drink cans, which can produce condensation and water spots.
•
Use felt pads on the bottom of objects that will remain on the tabletop for long periods. This is especially important for natural stone materials or items that retain moisture.
•
As with all HARBOUR purchases, we recommend using our custom furniture covers for items when not in use; furniture cushions and covers should be clean and dry before covering.
•
When possible, cushions should be removed before covering the frames for longer than a few days to avoid mold and mildew build-up.
•
If cushions get wet, tip them on their sides with the zipper facing down and unzipped to ensure that all water drains.
NATURAL TEAK
CHARACTERISTICS
•
One of the highlights of natural teak is its beauty and grain. Each teak piece is unique.
•
Depending on climate and exposure to elements, teak weathers to a beautiful silver-grey finish over time.
•
The wood will expand and contract with changes in climate. Shrinking of the wood can result in hairline cracks in the assembly joints or the grain itself. This does not affect the structural integrity of the frame’s construction.
•
We recommend using HARBOUR’s custom-fit outdoor covers to protect furniture from the elements.
•
The natural oils in teak may rise to the surface if exposed to rain and humidity, appearing like water stains.
•
Oil content can vary between pieces, so oil surfacing may recur multiple times before it naturally subsides over a period of several months.
CARE + MAINTENANCE
•
Maintain the original quality of the teak by applying HARBOUR Teak Cleaner at the beginning and end of each season.
•
To keep the surfaces clean from dirt, mold and mildew, periodically hose with water and HARBOUR Teak Cleaner, scrubbing in the directions of the grain.
•
For stubborn areas, use a power washer to clean. Hold the power washer approximately 30” away from the furniture and do not exceed 1200 PSI. Rinse and then allow to sun dry.
•
Exposure to moisture over time can raise the wood grain.
•
A light sanding with fine 120-grit sandpaper smooths the surface.
RECOMMENDATIONS
•
Furniture should be cleaned periodically and always before storing.
•
If furniture is in a saltwater environment, rinse weekly to remove all salt.
•
Avoid letting water stand on the surface of furniture and cushions.
•
As with all HARBOUR purchases, we recommend using our custom furniture covers for items when not in use; furniture cushions and covers should be clean and dry before covering.
OUTDOOR UPHOLSTERY AND INSERTS
CHARACTERISTICS
•
Our fabrics are 100% solution-dyed acrylic.
•
All our fabrics resist stains, mildew and fading, making them easy care and weather friendly.
•
Although our outdoor upholstery fabrics are mildew resistant, spores that create mold and mildew thrive in environments with dirt and moisture.
•
To deter mold and mildew, always remove wet cushions from furniture frames and perform frequent cleaning and maintenance.
•
All cushion upholstery and cushion cores are compliant with CA TB117-2013.
•
HARBOUR cushion inserts are constructed with a poly-foam core wrapped in a poly-casing to prevent water from penetrating the foam inner core.
•
Our upholstered outdoor furniture cushions are constructed of reticulated foam to facilitate drainage.
CARE + MAINTENANCE
•
To prevent embedded dirt stains, use a soft-bristle brush to frequently dust and remove dirt from the fabric.
For everyday stains:
•
Use a mild cleaner with warm water or HARBOUR Fabric Cleaner and a soft-bristle brush and rinse thoroughly.
•
Tip cushions on their sides with the zipper facing down and unzipped to ensure that all water drains.
•
Once completely dry, apply cushion covers and follow our tips below to repel dirt and moisture.
For mold and mildew:
•
Soak in a 1:20 solution of bleach to water and wash with diluted dishwashing liquid and rinse thoroughly.
•
A power washing with a pressure of 1200 PSI is highly effective – anything more will damage the fibers. Hold the power washer approximately 30” away from the cushion to wash away mold and mildew.
•
Tip cushions on their sides with the zipper facing down and unzipped to ensure that all water drains. For teak wood oil surfacing: oils released from natural teak can be removed from cushions by gently washing with HARBOUR Fabric Cleaner and either a power washer (1200 PSI) or a soft-bristle brush.
•
To avoid oil surfacing on dining chair cushions, flip cushions up when not in use until oil surfacing subsides.
•
Set-in stains and mildew may require professional cleaning.
RECOMMENDATIONS
•
Furniture should be cleaned periodically and always before storing.
•
If furniture is in a saltwater environment, rinse weekly to remove all salt.
•
Avoid letting water stand on the surface of furniture and cushions.
•
As with all HARBOUR purchases, we recommend using our custom furniture covers for items when not in use; furniture cushions and covers should be clean and dry before covering.
FABRIC (RIVIERA)
•
Brand: Mario Sirtori
•
Milled in Italy
•
Composition: 100% polypropylene
•
100% recyclable
•
100% non-toxic materials
•
Resistant to mold, bacteria, chlorine, humidity, sun, food stains and sweat
•
Quick drying
•
Martindale: 20,000
•
Cleaning Instructions: Machine wash at 30 degrees Celsius and air dry (do not iron or put in dryer).
•
Bleach Cleaning Instructions: Use 1:10 diluted solution of 5% household bleach with water. It is extremely important to properly remove all bleach with water and to carefully dry up the cloth before sunlight exposure to avoid bleach spots or discoloration.
FABRIC (SIESTA)
•
Brand: Mario Sirtori
•
Milled in Italy
•
Composition: 100% polypropylene
•
100% recyclable
•
100% non-toxic materials
•
Resistant to mold, bacteria, chlorine, humidity, sun, food stains and sweat
•
Quick drying
•
Martindale: 20,000
•
Cleaning Instructions: Machine wash at 30 degrees Celsius and air dry (do not iron or put in dryer).
•
Bleach Cleaning Instructions: Use 1:10 diluted solution of 5% household bleach with water. It is extremely important to properly remove all bleach with water and to carefully dry up the cloth before sunlight exposure to avoid bleach spots or discoloration.
BATYLINE
CHARACTERISTICS
• Batyline is the industry standard for outdoor sling furniture. It was developed by French industrial group Serge Ferrari, the global leader in durable materials for over 30 years. Batyline is a woven polyester fiber protected by PVC coating. The fibers are then bundled together in order to obtain an exceptionally solid substance that is permanent, resistant to stretching and immune to cracking.
• Batyline does not deform or create pockets. The most important feature is its pliancy and optimal seating comfort. Batyline textiles offer excellent resistance to mold and mildew and benefit from surface treatment against UV degradation. This surface treatment also offers exceptional resistance to dirt.
• All Batyline textiles are certified Oeko-Tex.
• With HARBOUR Fabric Cleaner and either a power washer (1200 PSI) or a soft-bristle brush.
• To avoid oil surfacing on dining chair cushions, flip cushions up when not in use until oil surfacing subsides.
• Set-in stains and mildew may require professional cleaning.
CARE + MAINTENANCE
•
For spot cleaning: Brush off any dirt or debris with a soft bristle brush or spray off with a hose.
•
For a deeper cleaning: Mix warm water with a mild soap and clean with a soft bristle brush.
•
Do not use abrasive cleansers.
•
Rinse with water and dry with a soft cloth.
RECOMMENDATIONS
•
Furniture should be cleaned periodically and always before storing.
•
If furniture is in a saltwater environment, rinse weekly to remove all salt.
•
Avoid letting water stand on the surface of furniture and cushions.
•
As with all HARBOUR purchases, we recommend using our custom furniture covers for items when not in use; furniture cushions and covers should be clean and dry before covering.
OLEFIN ROPE
CHARACTERISTICS
Olefin rope is a strong synthetic quick-dry fiber that is stain, mildew and sun resistant. It is best known for its strength and color fastness.
CARE + MAINTENANCE
•
For spot cleaning: Brush off any dirt or debris with a soft bristle brush or spray off with a hose.
•
For a deeper cleaning: Mix warm water with a mild soap and clean with a soft bristle brush.
•
Do not use abrasive cleansers.
•
Rinse with water and dry with a soft cloth.
RECOMMENDATIONS
•
Furniture should be cleaned periodically and always before storing.
•
If furniture is in a saltwater environment, rinse weekly to remove all salt.
•
Avoid letting water stand on the surface of furniture and cushions.
•
As with all HARBOUR purchases, we recommend using our custom furniture covers for items when not in use; furniture cushions and covers should be clean and dry before covering.
TRAVERTINE
CHARACTERISTICS
Travertine is a natural stone, formed of limestone deposited by mineral springs. It is extremely porous and requires constant care.
CARE + MAINTENANCE
•
Clean your stone top on a consistent and regular basis:
•
Brush off loose dirt and dust. Create a cleaning solution of warm clean water and mild soap. Use a soft, clean cloth (one that won’t bleed color ) or sponge. Rinse thoroughly until all soap residue is removed. Dry thoroughly after cleaning with a clean cloth to prevent water spots.
RECOMMENDATIONS
•
Coasters should be used to help prevent stains, scratches and etch marks.
•
All spills should be wiped up immediately to help avoid staining or etching of the stone surface.
•
Avoid abrasive or acid-based products.
•
Furniture should be cleaned periodically and always before storing.
•
If furniture is in a saltwater environment, rinse weekly to remove all salt.
•
Avoid letting water stand on the surface of furniture.
•
As with all HARBOUR purchases, we recommend using our custom furniture covers for items when not in use.
LAMINAM
CHARACTERISTICS
Laminam is a man-made ceramic slab manufactured in Italy. It is a nonporous surface that is resistant to mold, mildew and fungi. Laminam is sealed with a 2-step sealant process: anti-fleck sealant and stain repellent, making it strong and highly resistant to scratching and abrasion.
CARE + MAINTENANCE
For regular cleaning:
•
Use hot water and a neutral detergent if required with a soft cloth or soft sponge. Rinse with plenty of water and dry the surface with a clean, soft cloth. To prevent matte stains, do not use products containing wax. Stains not promptly removed may leave more or less visible traces on the surface, in accordance with the tolerance of the specific type of finish.
RECOMMENDATIONS
•
Furniture should be cleaned periodically and always before storing.
•
If furniture is in a saltwater environment, rinse weekly to remove all salt.
•
Avoid letting water stand on the surface of furniture.
•
As with all HARBOUR purchases, we recommend using our custom furniture covers for items when not in use.
RUGS
CHARACTERISTICS
Our performance rugs are made form 100% Olefin. Olefin is UV stabalized, stain resistant, mold resistant, and waterproof. They are designed for indoor and outdoor use.
CARE + MAINTENANCE
• Clean spills immediately by blotting with mild soap and water. Small size (2x3) can be machine washed, All sizes can be rinsed and lay flat to dry. Recommended drying outdoor and try to protect your floor while rug is wet. Professional cleaning is recommended if spills cannot be cleaned with house hold product.
RECOMMENDATIONS
• Sweep your rug with a broom or carpet sweeper on a weekly basis.
• If your vacuum has a beater bar, it should be turned off.
• Underlay is recommended to extend the life of your rug.
• Keep the rug away from chlorine and salt water.
WEATHER COVERS
CHARACTERISTICS
HARBOUR custom-fit covers offer high resistance to water, UV rays, mold and mildew. Easy to put on, take off and store, they’re made from marine-grade material fabric for maximum protection. They also feature double-stitched seams with fully finished tailoring.
CARE + MAINTENANCE
For spot cleaning:
•
Brush off any dirt or debris with a soft bristle brush or spray off with a hose.
For a deeper cleaning:
•
Mix warm water with a mild soap and clean with a soft bristle brush.
•
Do not use abrasive cleansers.